Elevation®
The Elevation ONE Balcony Waterproofing System has been developed from the deck up to be the most reliable, most effective, most consistent wood-framed balcony waterproofing system available.
-
Sheet Waterproofing SystemElevation® S60 Membrane
ELEVATION® S60 is a sheet waterproofing membrane engineered specifically for use with the ELEVATION® ONE Waterproofing System.
-
Sheet Waterproofing SystemElevation® SP1 Primer
ELEVATION® SP1 Waterproofing Primer is a water-based, pressure sensitive primer for use with S60 Sheet waterproof membrane. SP1 is suitable for use for application to concrete, plywood and polyisocyanurate roofing insulation.
-
Sheet Waterproofing System
Elevation® SM2 Lap Sealant
Elevation® SM2 Urethane Waterproofing is a multi-purpose, resilient joint sealant that combines economy and high performance. It is ideal for a wide range of applications where joint movement requires compression and extension in excess of 25%. SM2 is a moisture-curing polyether sealant that is effective in damp, dry or cold climates. It is free of solvents and isocyanates.
-
Waterproofing Components
Elevation® DM1 Drainage Mat
Elevation® DM1 drainage mat is a low profile drainage matting designed to create a sub-concrete drainage plane for quick and efficient removal of water from the balcony. At just 1/8” (3.5mm) total thickness, DM1 does not require modifications to the framing or T-bar dimension.
-
Waterproofing Components
Elevation® DM2 Drainage Mat
DM2 Elite is a high compression resistant cuspated HDPE design bonded to a 125g non-woven filter fabric. DM2 Elite has a continuous sheet of polyolefin plastic providing an additional waterproof/protective layer over the Elevation Waterproofing System.
-
Waterproofing Components
Elevation® FT Tape
Elevation® FT Tape waterproofing tape is a pressure sensitive tape recommended for use during flood testing of installed Elevation® Waterproofing Systems. The flashing tape is manufactured with a nominal 2 mil aluminum foil backing and a high-performance rubber adhesive.
-
Balcony Embed System
Elevation® T-Bar
Properly installed, Elevation® Termination Bar (T-Bar) provides a pour stop for the wear layer on a waterproofed balcony and maintains a weep system to ensure proper removal of moisture trapped beneath the wear layer. The Elevation® Termination Bar is manufactured to our specifications resulting in greater strength and consistency of dimension, gauge and finish when compared to many regionally available products.
-
Waterproofing Components
Elevation® T-Guard – Protective T-Bar Tape
T-Guard Tape is designed to provide superior protection for T-Bars during painting, spraying, and other finishing processes. It features a UV-stabilized adhesive that prevents melting to surfaces and allows for easy removal after application. T-Guard Tape is 4.5” wide to complete cover most T-Bars. It maintains the original finish and prevents contamination and discoloration throughout the project. It’s manufactured with a special adhesive which is easy to apply, adheres well, and is easy to remove without residue.
-
Waterproofing Components
Elevation® Spacer Shim
Made of EPDM rubber, providing a constant weep system gap between the drip edge and T-bar. The rubber properties provide an enhanced seal around fastening penetrations.
-
Waterproofing Components
Elevation® TTP
T-Bar Termination Pockets are the starting point of all ELEVATION® Waterproofing Systems. Made of 100% welded heavy gauge aluminum flashing for durability and long term exposure. TTP’s eliminate relying on sealants and layers of membrane to seal the joint where the T-bar and Drip Edge flashing meet the building.
-
Waterproofing Components
Elevation® Combo Corners
Elevation® Combo Corners Flashing Corners are Galvanized or Poly corners designed to provide flashing support at outside corners and door opening, while providing a smooth clean surface for proper S60 membrane adhesion at corners.
-
Balcony Embed System
Elevation® Embed Pan
Designed to deliver a fast, reliable, worry-free solution for the waterproofing of balcony rail post embedded plates. Constructed of durable ABS, designed as a flashing pan that surrounds the embedded plate with a three lip system.
-
Waterproofing Components
Elevation® RSE (Railing Embed Support)
ELEVATION® RSE (Railing Embed Support) rail mounting plate provides a mounting plate for railing systems to weld to once the finished concrete is installed. Due to the offset top plate and post, you lose less square footage of the balcony.
-
Balcony Embed System
Elevation® Embed Pan Sealant
Seamless and joint free waterproofing system created from a single component, liquid applied, coal tar free, urethane/polyurea roofing and waterproofing membrane system for vertical and horizontal surfaces.
